Targetware: Flight Model Development
Targetware ACM File Guide
PART REFERENCE: Jet
orientation = x, y, z
throttle_rate = this is
set as the percentage per second, so for a 10 second spool up time, set
to 0.1
throttle_idle = fraction
of throttle opening (0.05 works well)
afterburner = set to 1 if
afterburner is present, 0 if not
bypass_ratio = set to 0
for turbojets
fan_pressure_ratio = set
to 1.0 if not a turbofan
compressor_ratio = determines
efficiency of the engine, adjust for proper fuel consumption
inlet_size = an area in
square meters that directly influences mass flow, thus thrust and fuel
consumption. Adjust in combination with compressor_ratio.
sound = path to sound effect
file
|
